How to light a water heater pilot light Pilot light lighting by

Kenmore Water Heater Pilot Light. Kenmore Power Miser 9 Pilot Light Keeps Going Out Heaterview Pilot won't light on Kenmore water heater - I had to fill a water bed so I used hot water Pilot line, thermocoupler line, and spark ignition line runs down into the burner chamber

Relighting the pilot light is a simple task that can be completed in a matter of minutes, restoring hot water to your home Keep holding the knob down for at least 1-2 minutes before pressing the ignitor button

100112330 Water Heater Pilot Assembly, Gas Thermopile Assembly Replace

If the pilot still does not light then the orfice may be plugged in which case you will have to turn the gas off and pull the whole burner assembly and disconnect the silver tube on the bottom of the pilot assembly. Pilot line, thermocoupler line, and spark ignition line runs down into the burner chamber After filling the bed and waiting for the hot water to recover I found that it was till cold after a few hours.

Upgrade 100112330 Water Heater Pilot Assembly Replacement Kit for 300. Pilot won't light on Kenmore water heater - I had to fill a water bed so I used hot water After filling the bed and waiting for the hot water to recover I found that it was till cold after a few hours.

Help! Pilot won't light on Kenmore water heater. If the pilot still does not light then the orfice may be plugged in which case you will have to turn the gas off and pull the whole burner assembly and disconnect the silver tube on the bottom of the pilot assembly. Pilot line, thermocoupler line, and spark ignition line runs down into the burner chamber